Food grade milk equipment cold pasteurized machine/sterilized milk process line

Food grade milk equipment cold pasteurized machine/sterilized milk process line

High temperature food sterilization overview

In the high temperature food sterilization process, sterilize main target is clostridium botulinum, this bacteria can produce fatal damage toxin to human body, which is a heat-resistant anaerobic bacteria, it will lose biological activity within 3 minutes under 121 ℃ environment, lost biological activity at about 6 hours under 100 ℃ environment. The higher the temperature, the shorter bacteria survival time. After scientific test, sterilization at 121 ℃ is more appropriate, the packaging has a good heat resistance at this time, and more good food taste. 121 ℃ sterilization, the food center F value reach at 4, clostridium botulinum will not be detected in the food, meet the commercial asepsis requirements.

The purpose of the sterilize pot is provide a sealing environment for high-temperature food sterilization at the specified temperature, time and pressure, it must have a good thermal distribution, when sterilizing arbitrary point temperature and average temperature difference should meet the requirements in the sterilization pot. If some point temperature below the average temperature, then the point can not reach the scheduled sterilization F value, the food near this point can not meet the sterilization requirements. Homogeneously thermal distribution is the most important technical target for measure the quality of sterilization pot, which can be measured by thermal distribution analyzer.

When food in high temperature environment, the longer time the worse taste, the more nutrient loss, which requires sterilization pot temperature at each points must be quickly consistent when heatingup, maintain a high degree of F points consistent, so it can quickly end the sterilization process. The cooling process should be fast too, so the food can get away in the shortest possible time from high temperature environment, which requires sterilize pot scientific and reasonable design water flow, minimize the sterilization process time.

External installation dimension: L1750*W1000*H1400mm

Sterilier barrel: diameter 700 mm, length 1200mm

Tray size: 1200*450*150 mm (3 trays)

Working volume: 0.24 CBM (240 Liters)

Control method: electric appliance semi automatic
Electric: 380V 50HZ 3 phase

Power: 30KW
Max working temperature: 143 ℃

Max pressure: 68 psi (0.47 Mpa)

Material: stainless steel or carbon steel

Weight: 350 kg

Performance characteristics of electrical semi-automatic control system sterilizer

1. Semi-automatic control; control sterilization temperature, time, pressure.

2. mechanical safety chain.

3. Mechanical overpressure protection.

4. Intelligent temperature control.

5. Temperature difference inside sterilizer (temperature distribution) ± 0.5 ℃.

Applicable packages: soft package, (CPP + PA, aluminum foil, PET + CPP + PA), glass bottles, tinplate etc.

This thermal distribution diagram shows arbitrary 4 point temperature test results in the sterilizer, after temperature stable, the temperature difference at points ≤ 0.3 ℃)

The sterilizer also need equip with 2 water tanks, 500 liters each, 1 tank storage cold water for cooling, another tank storage hot water for sterilize, 140 degree centigrade high temperature resistant, you can also equipt bigger cold water tank, because it need cold water ciculation for cooling, it will be cooling faster if have more cold water. And a air compressor, air flow 0.17m3/min,pressure 10kg.

wooden case or according to your requirement

1. extensive production experiences more than 20 years

2. largest manufacture factory in Henan

3. professional design team

4. You can contact me any time

5. high quality and competitive price

6. our products sell well to Middle East, Russia, Africa, South America, and so on

7. good after-sale

Are you confused about:

1, Q: How about the after service?

A: We have a strong team, special for after service. Machine guarantee for one year. Within warranty period, if there are problems, not caused by human improper operation, we will charge of it. We will send the replace parts for free and technical guidance.

2, Q: How to ensure the transaction security ?

A: We focus in this field more than 10 years. And we are the gold member of alibaba. We run the foreign business on Alibaba for many years and have a very good credit .

3, Q: Where is your factory located? How can I visit there?

A:Our factory is located in Zhengzhou City, Henan province. You can fly to Xinzheng international airport and or by high-speed train directly. Our company will pick

you up .

4, Q:How does your factory do regarding quality control?

A:Quality is priority. We always attach great importance to quality controlling from

the beginning.

5.Q: How to place the order?

A: First we will recommend the suitable machine according to customer's requirements. If everything is ok, we will make the proforma invoice for you . After the invoice confrimed, you can make payment.

After we received the money,we will arrange to delievery the machine.

6. Q: What is the producing time?

A: Usually ,we have the stock,if the order is large or machine need to customize ,we can negociate it.

7.Q: What’s the payment method ?

A: Normally, we accept the payment by TT, Western Union. You can also choose

to pay through Alibaba. For it , we can discuss