1-20T/H Professional Factory complete set of palm oil mill equipment

1-20T/H Professional Factory complete set of palm oil mill equipment

• palm oil mill equipment

• palm oil mill

• complete set of palm oil mill equipment

1.Introduction for 1-20T/H Professional Factory complete set of palm oil mill equipment

We adopt advanced dry process method,with the hot air transfer the heats ,so they have many kinds of characters,such as continuelly automatic operation,steady running,low noise and reliable performance.

Specially not produce the waste water for pollution,and save the investment .

2. Specification and raw material for 1-20T/H Professional Factory complete set of palm oil mill equipment

Treatment fresh palm fruit bunch 1.0t /h,max 1.2t/h

3. Main process as below for 1-20T/H Professional Factory complete set of palm oil mill equipment

Cleaning process

The purpose of cleaning is to remove out the fiber,unqualified fruit and waste clay from the raw palm fruit.

It is one kind of centrifuge separator .

Palm fruit dryer section

This process adopts the vertical dryer ,with the hot wind to transfer the heats (80-90degrees). It removes out the more mositure ,let the palm fruit pulp become very softy and damage pulp cell structure.

Automatic control and safety device of automatic moisture meter, automatic temperature control, pressure switches, motor overload protection, automatic ignition, automatic shutdown

Note: the selection of hot air furnace as heat source, The fuel could be palm shell,fiber,and palm bunch,etc.

De-mesocarper and pre-pressing section

After drying ,The palm fruit quickly is carried out for Demesocarper,to separate to fruit pulp and nut.

The nut is conveyed into nut clearer process,the palm pulp is fed into screw cooker for heating . The pulp is fed into one screw press for pressing out some oil .

Pressing section: Palm fruit pulp enter into continuous screw press for pressing,which is divided into two parts: crude oil, solid impurities mixture including to the cake . Crude Oil gutter inflow to oil purification section; press cake is conveyed into the fiber- recovery section.

Crude oil purification section

It adopts the vibrate sieve to remove out the big dregs,fiber from the crude oil .

then use the Plate filter to remove out the small dregs . After two steps the crude oil is very clearer.

Palm nut treatment process/nut clearer section

This process adopts the centrifuge sieve to separate the nut and fiber and dregs.

The nut is for store after drying under vertical dryer,the fiber and dregs is for the fuel . dregs is for the fuel .

4. More equipment photos for 1-20T/H Professional Factory complete set of palm oil mill equipment